415 West Eaton Pike, Richmond, IN 47374
P: 765-935-7477 • F: 765-935-7033
Info@SkatesUS.com
News
NEW to the site:
|
If you want to learn about EDEA, this is a must read!!! |
|
| 3. Slide Shows: | |
| EDEA Skates Technologies | |
| EDEA ICE Skate Products | |
| 2. Videos: | Roller Skate Mounting (in Detail with Pictures) |
| David Ripp's History (parts 1 & 2) | Roller Skate Maintenance |
| Roll-Line Production and World's Videos (4 Videos) | 4. Charts: |
| Ice Blade Evaluation Videos (4 Videos) | Ice Blade Profile Radius Information Comparisons |
| Fun Videos (3 Videos) | |
| EDEA UnderSoles with Shock Prevention Technology | EDEA Skates Comparative Sizing Chart and Blade Sizing |
On Tour:
2012 U. S. Junior
Figure Skating Championships
At the
Suburban Ice East Lansing
East Lansing, MI
2810 Hannah Blvd.
East Lansing, MI 48823
Hosted by
The Lansing Skating Club
Saturday December 10th through Wednesday December 14th, 2011
During the Competitions, will Open Daily approximately. 9:30am
We will be set up and showing Products from EDEA Skates. We will have more than 150 pairs of Comfortable, Great Fitting EDEA Skates available for Sizing, Fitting, and Purchase along with all of those great accessories from EDEA Skates.
We will also be Demonstrating and have available the Incredible NEW EDEA Anti-Shock Undersoles.
We will have our Mounting Station with us to complete entire Skate Packages.
We will have a very limited number and sizes of Blades available.
- Skates US, Inc. will have the ICE Skate Models in most Sizes from EDEA Skating Boots for Sizing and Fittings
- Skates US, Inc. will all of those Great Skating Accessories from EDEA.
- Skates US, Inc. will provide information on the newest Skate Technologies in Ultra-Light Incredibly Comfortable Skating Boots from EDEA.
- Skates US, Inc. accepts: Master Card, Visa, Discover and American Express
----------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
- Skates US, will be posting more upcoming events very soon
----------------------------------------------------------------------------------------
NEW !!!!
EDEA “NOENE” Anti-Shock Technology UnderSoles
Click the above image to see the incredible Video showing the amazing EDEA UnderSoles
EDEA presents the world’s first Shock Absorbing UnderSole for Skaters (both Ice and Roller)
The competition among competitive Skaters is becoming tougher with more and harder jumps and jump combinations being trained earlier and for a longer period of time through the skating career. This training to compete at a higher level, earlier has become much more intense. This level of training intensity can lead to additional stress in the head, neck, back, hips, knees, ankles, and heels due to the repeated impact of the landings.
EDEA through SkatesUS.com, is now providing a magical solution that actually absorbs, diffuses, and disperses 94% of the shock and impact vibrations of landing jumps from injuring key parts of the body. NOENE Shock Technology , a Swiss technology is being employed by EDEA to absorb, diffuse, disperse and effectively stop up to 94% of the SHOCK and IMPACT VIBRATIONS from the heel to the head.
Skating surfaces (both ice and roller) are hard surfaces that absorb very little if any of the shock of the impact from landing jumps. In fact these shock and impact vibration waves are actually reflected back into the Skaters body to diffuse and absorb them. These waves of energy caused by the collision shock of landing are called kinetic energy or also negative energy. This negative energy can cause long-lasting issues to the nerves that control the free movement of the body. These micro-trauma can show up as pinched nerves, tendinitis, osteitis, and micro fractures to name a few, which can lead to the soreness of the feet, heel spurs, ankles, shin splints, and joint damage and provoke fatigue from the foot through the knees, hips, back, and right up to the base of the skull.
EDEA “NOENE” Shock Technology UnderSoles are a Class 1 Medical device, only an extra thin 1mm thick and ultra-light 13 grams of weight (in size 280, approx a men’s size 9), and are to be installed under the EDEA Anatomic InnerSole or custom orthotic innersoles. They can be easily hand washed with soap and lukewarm water and a sponge. The guarantee is 1 year. Even this very thin EDEA UnderSole will provide the shock absorption qualities for which “NOENE” is famous.
The Skater’s instrument is worth gold, take care of it.
----------------------------------------------------------------------------------------
EDEA CARBON FILLER PLUGS
(Click on the Picture to go to the SkatesUS.com Store)
Pack of 25, 2.5mm Carbon Fibre Filler Plugs made in Italy from Carbon Fibre rods
The EDEA CARBON FILLER PLUGS are used to fill unused holes when mounting a new blade or repositioning an existing blade.
How to use the Carbon Filler Plugs
Apply adhesive (usually Marine Epoxy) to the Carbon Filler Plugs, then utilizing needle nose pliers to hold the Carbon Filler Plug, use a small hammer to tap them into the unused holes. The Carbon Filler Plugs are exactly the correct length for the EDEA Footbed After allowing the adhesive to harden, the new holes can be drilled with a 2.0mm (5/64ths”) drill bit. (If there is no hole interference for new hole locations, it is not necessary to fill the unused holes.)
Check Out the NEW EDEA
Rolling Back Pack
Click to see it in our store
----------------------------------------------------------------------------------------
Check Out the NEW Roll-Line
Frame Comparison Chart in the
Learning Center
--------------------------------------------------------------------------------------
The Roll-Line Professional DANCE (and Dance JAM) Skate represents a turning point in DANCE Plate Technology.
The NEW DANCE is the Professional Dance, Solo Dance, and Dance JAM, Style Skating, and is an incredibly maneuverable Skate for Roller Derby. The Dance Skate from SkatesUS.com is engineered especially for Dance Skating of all types (including the tight action needed for Roller Derby) with an Ultra Lightweight Structure designed (similar to the RING) and a NEW Wider Angle Steering Mechanism and Lower Center of Gravity to allow you to skate those Deep and Sharp Edges at consistently high speeds as used in all kinds of DANCE Skating. The Roll-Line Professional Dance Skate (similar to the Energy Steel) is forged from a solid bar of a special Ergal Aluminum Alloy and completely CNC machined. Ergal is one of the Strongest and Lightest Aluminum Alloys available and has a lower expansion coefficient and offers the best coiled-spring response. The Roll-Line Click Action adjustment system provides optimum, accurate, articulate, and consistent Action. The Professional Dance Skate features the strongest Steel Axles available and adjustable Pivot Pins and has a Toe Stop Mount. The design and materials of Roll-Line Skates from SkatesUS.com, provides athletes the proper support of the skating shoe and give the most sensitive control, the greatest and absolute fastest response available from any skate, providing a sense of great stability and action.
Available in Sizes 140, 150, 160, 170, and NOW 180.
--------------------------------------------------------------------------------------
Check Out our Roller Derby Section of the SkatesUS.com Store
Click the Image Below
It's ALL About Rollergirls Skating on the Best Equipment on the Planet, Roll-Line from Skates US, Inc.
Check Out the GREAT Roller Derby Information Page in the Learning Center
Roller Derby Girls, if you are planning a TEAM or LEAGUE
Purchase of Equipment, Be Sure to Call (765) 935-7477 for
Special Pricing
Check out the NEW Roll-Line Ultra LIGHT FreeStyle Wheels In the Store
Click on the Picture of the Wheels to take you to the page or follow below:
Go to: Store
Go to: Roll-Line Wheels
Go to: Artistic FreeStyle Wheels
Scroll Down: to see the NEW Favorite that was introduced at the World Championships in Australia:
Fox LIGHT 92A 55mm
Panther LIGHT 95A 55mm
Mustang LIGHT 97A 55mm
These New Wheels are really Light
We have added GREAT New Ice Skates and Blades!!!
The Paramount FreeStyle and Dance ICE Skates are NEW Technology Blades for FreeStyle and Dance Ice Skating. These Skates are ideal for Mid to the very Top Level ICE Skaters in both FreeStyle and Dance. The Paramount ICE Blades utilize a Lightweight Aircraft Aluminum Holder with a Very High Quality (8 Element) 440C Stainless (60 RC), (7 Element) 420C Stainless (58 RC), or (1085) Carbon Steel (58RC) Runners. Paramount Ice Blade’s Hollow and Profile is CNC Machined to much higher standards of accuracy, with tighter Blade tolerances than is possible when making and grinding blades by hand. Paramount Ice Skates are Lighter by up to 50% and Stronger due to the Unique Triangular Shaped Frame which increases both Strength and Stiffness and allows Ice Skaters using these Blades to have Higher and Longer Jumps and for Ice Dancers to have Deeper, Faster Edges and Turns. Most other Blades are still made from Carbon Steel (a 16th Century Technology), then brazed together as separate pieces. The High Grade Blade Runner is Stronger and Lighter than Carbon Steel which dramatically increases the life of the Blade and Holds an Edge much longer between Sharpenings.
(Click the Picture Below to go to the Product Pages)
Combining these Lightweight Paramount ICE Skates with the incredible Lightweight EDEA Skates can reduce the weight of a pair of Ice Skates up to 5 lbs. This level of weight reduction will help your performance.
When mounting to EDEA Skates, the Blade Sizing and Mounting is very consistent for each size and between models, please use the Sizing Chart and Mounting Instructions which are in the Learning Center. When properly Mounted utilizing the EDEA screws, no additional water proofing of the Skates should be necessary.