Roll-Line SPEED MAX Series II – Micro Bearings
Type:   Ultra Custom Series II – Micro Bearing Exclusively from Roll-Line and Skates US
Axle Center Bore:   7mm
Number of Balls:   Ultra Precision 11 Ball with The World’s most INCREDIBLE ROLL
Special Features:   Series II – Micro Bearings are specifically designed for Roller Skating with wide deep races and uses a Super Roll Steel Ball Crown Cage.

ABEC Rating:   ABEC 9
One (1) Set=   16 Bearings

The Roll-Line SPEED MAX Series II – Micro Bearings provide THE absolute WORLD’s Most INCREDIBLE ROLL . The SPEED MAX Series II – Micro Bearings are specifically made for ALL Types of very High Level Skating, including Figures, Dance, Original, and Free Dance, FreeStyle and Pairs Competitive Roller Skating and ALL other forms of Skating from Speed skating to Jam skating to Rhythm skating to Roller Hockey and even hard hitting Roller Derby or just about anyone that just wants that wonderful ROLL . These incredible Bearings are changing the rules for Roller Skating Bearings and are available through Skates US. The Roll-Line SPEED MAX Series II – Micro Bearings are wonderfully Free Rolling with the absolute minimal Radial Play which promotes and very evenly distributes the load across the 11 balls for optimal Roll and a very good amount of Axial Play or Thrust, which is the side movement of the inner race in relation to the outer race. This movement is very important because when Skaters push, we always put side load on the skate to get power in the push or stroke. If the Bearing does not allow for this, it will bind and LOOSE operating speed or ROLL. These provisions in the Race Curvature and Contact Angle allow the Roll-Line Series II Micro Bearings , to ROLL, and Roll, and Roll, and Roll, and Roll, and Roll, and keep on Rolling.

The Roll-Line 7mm SPEED MAX Series II – Micro Bearing System NOW Fits ALL Frames and will withstand the punishment of the most demanding of Skaters. . These absolutely wonderful Bearings WILL work on ATLAS Skates, Snyder Skates, and any others using 7mm Axles. They Should Be used with a Spacer between the two bearings in each Wheel to obtain the maximum performance, (of course this also means that the tolerances of the Wheel bore and center web must be accurate) . The Series II - Micro Bearings are mounted like Standard Bearings with the shields to the Outside.

Roll-Line 7mm SPEED MAX Series II – Micro Bearings are the BEST ROLLING Bearings available and they are made specifically for you to enjoy while Roller Skating on Roll-Line Skates. The The Roll-Line SPEED MAX Series II – Micro Bearings will compare to and out-perform the much more expensive Ceramic Bearings.

Roll-Line SPEED MAX Series II – Micro Bearings are EXACTLY the same Micro Bearings as those that we have been providing under the name of Series II Micro Bearings. Roll-Line SPEED MAX Series II – Micro Bearings are EXACTLY the same Micro Bearings

For more information on Bearings and their care, please check out the Bearing Information section of the Learning Center at SkatesUS.com .