Crazy Derby » Crazy Derby Skate Boots » 350 Shopping Cart - Checkout - My Account  


DBX 3 Derby Boot

Click for Larger Image

CRAZY Skates    DBX 3 Boot (Only)
    Derby Collection
Sizes:  Euro                 36 to 47
            US Ladies          5 to 14
            US Mens            4 to 13

          (all Sizing based on Euro Sizing)
DBX 3 Boot Vegan (MicroFiber)
      Color:  Black

Figure Dance FreeStyle
Derby Raiting Recreational Jam
Rhythm Quad Hockey Quad

The CRAZY Skates DBX 3 Boot is a very High Performance Derby Boot and is the culmination of several years of intensive research and development to bring the very best COMFORT and PERFORMANCE to Skating and especially Derby Skating.  Crazy Skates of Australia, has assembled a team of some of the best Skaters, Derby Skaters, Boot Makers, Design Engineers, Mechanical Engineers, and Chemical Engineers in the world to provide Skaters everywhere with a whole new level of Comfort and Performance at incredible prices from

The CRAZY Skates DBX 3 Boot is a totally VEGAN MicroFiber Boot that incorporates three core technologies and many other features. 

The first is the HLT or Heel Lock Technology, which utilizes Memory Foam (like on your mattress at home) to lock the Heel into the Heel Pocket and to secure the Achilles Tendon preventing Heel Slip.  Approximately 70% of the DBX 3 Boot is “Heat Shapeable” (see the video on our site) due to the use of an ABS Counter that is designed into the Boot from the inside Ball of the Foot and around the back of the Boot to the outside Ball of the Foot.  “Heat Shaping” is what allows the Stock DBX 3 Boot become a Custom Boot with a Custom Fit, just for you.  CRAZY Skates uses CoolMax MicroFiber Padded Lining to wick the perspiration away from the Skaters Feet and the when the Skates are removed and allowed to ventilate, the moisture is allowed to escape and keeps the padding from rotting and going flat. 

The second core technology is IFS or Integrated FootBed System.  The Integrated FootBed System provides three (3) levels of Arch Support:
1.  Red is for the Low Arch or Skaters with almost totally Flat Feet, but without Pronation issues,
2.  Yellow is for the Mid Arch which should be used by about 80% of Skaters, including those that have fairly Flat Feet and need the extra support to help with Pronation issues, this is the standard FootBed included in most of the DBX Skate Packages
3.  Blue is for those with an extremely High Arch that needs some extra support. 

Within each of the three (3) levels of Arch Support in the Integrated FootBed System, there are two (2) levels of Support:
1.  The Standard Shaped Foam Arch Support System (Standard with the DBX 3)
2.  The Extra Firm Hardened Arch Support System (Standard with the DBX 5)

This provides six (6) variations possible for each of the sizes of the Integrated FootBed System.  Choose wisely.
There are four (4) sizes of FootBeds to cover the entire DBX Size range.  These four (4) sizes are trimmed to fit the intermediate sizes.

These six (6) variations within each of the four (4) size ranges, make for a total possibility of twenty-four (24) Integrated FootBed System possibilities.  The DBX Skate Packages come with one (1) FootBed System as standard, any of the other additional FootBeds may be ordered as Optional Accessories.

The third core technology is the 3DT or 3D Tongue.  This Tongue System conforms to the Foot and allows for both Narrow and also very Wide Feet.  CRAZY Skates has designed a unique Tongue and Toe Box System that with proper lacing can provide for those Skaters with very Wide Ball of the Foot and Toe Box Areas, while if drawn tight can be brought in to fit a very Narrow Foot.  The 3D Tongue also wraps around the foot and with the Laces run through the Velcro Tongue Tab, which is held in place by the Wide Cinch Strap, the Tongue will stay in place and not slide off to the side. 
CRAZY Skates even has a special way of Lacing the Skates so as to be able to individually adjust the tightness of each crossing of the laces.  The Lacing System utilizes the Laces being installed Over the Top or from the Outside to the Inside and then when the laces are drawn, you will Cross Pull from the Center Out, and the Laces will lock in place when the proper laces are utilized.  To prevent the Toe Box from getting too tight over time, remember to loosen the Laces all the way down EVERY Time the Skates are taken off.  There are two Cinch Straps, the top one is used as a part of the Heel Lock System and should be used to assist in pulling the Heel back into the Heel Pocket.  The Toe Strap is a CRAZY Skates Exclusive Design and is used to eliminate Lateral Slide of the Ball of the Foot in the Boot.   The Heel of the Boot has a reinforced Heel Plate which will provide the CRAZY Skates DBX 3 Boot with Stability and not allow it to lay down or for the upper part of the Boot to pull away from the Sole.  The CRAZY Skates DBX 3 Boot integrates an extremely durable Toe Protector along with extra protection on both the inside and outside ball of the foot.  These protections will help the DBX Boot to last longer than others.  The CRAZY Skates DBX 3 Boot is a VERY well designed Skating Boot that takes a Stock Boot and allows the Comfort and Fit of a Custom Skate and also provides great control for the Skater over the Skate Frame underneath.  One of the most amazing things about the CRAZY Skates DBX 3 Boot is the extreme comfort and ease of Break-In.

The CRAZY Skates DBX 3 Boot incorporates extremely accurate and consistent Mounting Locators.
The Mount Positioning Locators are Centered, to suggest the just barely to the outside of the long axis mounting position and the CRAZY Plate Sizing should be based on Standard Length Plates, placing the Front Axle under the Ball of the Foot and the Rear Axle under the Center of the Heel.  This type of Mount provides the absolute best and most flexible Control of the Skates.  Other Custom Mounts are available, but without consultation, are not recommended and will take additional time and possibly charges.  The optional CRAZY Skates Power Wedges are a very distinct advantage to the Skaters using them.  The Power Wedge is a wedge of lightweight Nylon Plastic goes between the Toe of the Boot and the Flat top of the Plate (Skate Frame).  All shoes, boots, and Skating Boots have a natural curvature of allowing the Toes to come up and if the Skating Boots are pushed down to match the Flat top of the Plate the Boot can become deformed and mis-shaped placing stress on the Boot and potentially the Foot inside.  By installing CRAZY Skates Power Wedges, that fill this space and provide a solid surface for the Boot to rest on and press against (not allowing the toe of the Boot to Flex) during the pushing process actually greatly increases the Power of the Push, thus the name “Power Wedge”

What comes with the CRAZY Skates DBX 3 Boot: The DBX 3 Boot, includes the DBX 3 Boots, Laces, and a complete set of Mounting Hardware designed specifically for CRAZY Skates Venus or Apollo Skate Frames when mounted with Power Wedges (not Included).

Size Conversion Chart

Available Options:


Recommended Frames for Derby:

Recommended Frames for Recreational:

Recommended Frames for Jam:

Recommended Frames for Rhythm:

Recommended Frames for Quad Hockey:

Recommended Frames for Quad Speed:

Recommended Wheels:

Recommended Bearings:

English Espanol